Ideas of Kengo Kuma Glass House

Published On January 13, 2019 | By penulis | DESIGN

Kengo kuma glass house is a relatively inexpensive way to get style and the look of genuine stained glass. It can be used on all types of materials, including windows, vases and sun-fishers. There are some techniques to experiment with, each creating their own effects. Trying different styles can also increase your skills in this craft.

Concept Kengo Kuma Interior

Concept Kengo Kuma Interior


12 Photos Gallery of: Ideas of Kengo Kuma Glass House

Image of: Wood Glass Kengo Kuma Housing

Image of: Unique Kengo Kuma Housing

Image of: Review Kengo Kuma Housing

Image of: Porch Kengo Kuma Housing

Image of: Nice Kengo Kuma Housing

Image of: Modern Kengo Kuma Housing

Image of: Kengo Kuma Buildings

Image of: Kengo Kuma Association

Image of: Interest Kengo Kuma Interior

Image of: Indoor Kengo Kuma Housing

Image of: Custom Kengo Kuma Interior

Image of: Concept Kengo Kuma Interior

Draw your design or print an already made design to use it as a template. Thoroughly clean glass house or other material with warm soapy water and allow it to dry. Dirt, grease and dust will appear in the color. Attach the template to your project. Transparent tape works well. The design should be where you want the finished work to be and must not move while you are working on it. Apply adhesive or liquid lead, which works from top to bottom. If you use adhesive lead, place it correctly and remove the protective paper. Use a soldering tool to smooth out overlying edges. Carefully follow the pattern on the template until all lines are covered.

Clean kengo kuma house or other material between the wires. Working with the project may have left dust or fingerprints, so clean before using the paint. Liquid lead must be completely dry before doing so. Paint one section at a time. The method used to apply color varies. Use a brush, but if you think it leaves brush strokes, put a small bead of color in the middle of the section and spread it evenly against the outer edge with the head of a nail. Immediately take any air bubbles or debris that may have fallen into the color so that they will not be in the finished project. Allow the piece to dry properly.


Comments are closed.